If the diagonal is the hypotenuse of a right triangle, you can use the Pythagorean theorem: a^2 + b^2 = c^2, where a and b are the lengths of the sides that make the right angle, and c is the length of the hypotenuse.
to measure the wear and tear of the tire usage
The term "diagonal feet" typically refers to the diagonal measurement across a rectangular area, such as a room or a screen, usually calculated using the Pythagorean theorem. To find the diagonal feet, you measure the length and width in feet and then apply the formula: diagonal = √(length² + width²). This measurement is important in various contexts, including design, construction, and screen size specifications.
Any rectangle that measures 12-in x 13-in has a diagonal ofsqrt(122 + 132) = 17.692 inches (rounded)
Divide it across the diagonal - you don't need to measure anything.
21 inches is the diagonal measure of the screen in a 21-inch TV.
The square of the diagonal is (652+692)=8986 The diagonal is then the square root of 8986=94.79...
6.2
Measure from one corner to the diagonal corner, and then switch and measure the other 2 diagonal corners. If the measurements are the same, then the walls are at right-angles to each other.
Diagonal = 18*sqrt(2) = 18*1.414214 = 25.45584 feet
by measuring diagonal length
The longest diagonal in a cube is equal to the length of the edge, multiplied by the square root of 3.
A regular quadrilateral is a square. As to the measure, the answer depends on the measure of WHAT? An angle, a side, the diagonal, area, perimeter, etc.
to measure the wear and tear of the tire usage
The answer depends on what characteristic you wish to measure: it volume, total surface area, largest diagonal, mass, colour, temperature, density, ...
9.2 ft
5.7 ft
Any rectangle that measures 12-in x 13-in has a diagonal ofsqrt(122 + 132) = 17.692 inches (rounded)